Yes, bloodstone can go in water (or get wet), but as with all minerals, we don’t recommended extended soaking of this material.
In the article that follows, you’ll learn more about bloodstone, including what you need to know about putting your bloodstone in water.
Can Bloodstone Go In Water? (EXPLAINED)
Bloodstone can go in water, and many people do soak it in baths for a long period of time.
With a little salt, this is a very common way of cleansing gems that can withstand water.
However, just because you can, doesn’t mean you should.
First, bloodstone does have iron oxide in it which could interact with the water and lead the stone to develop rust over time.
This could change the color of the stone and also its overall aesthetics.
The rust is almost impossible to remove without compromising the stone’s aesthetics even more.
Over time it just isn’t the same stone anymore.
This will happen sooner if the stone is lighter.
Next, when you put bloodstone in water regularly, it may also begin to form cracks over time.
They could be invisible to the naked eye.
Cracks in any stone may make it more likely to break, even if the stone is a very hard stone.
You also want to be careful about immersing your bloodstone in water regularly if your bloodstone is shiny and polished.
Water can dull the polished finish on bloodstone and make it appear on the rough side.
There are ways to care for your bloodstone with water without taking these risks.
Care of Bloodstone
If you are concerned about damaging your bloodstone with water, be assured that you can still use water to clean your bloodstone when you want it to, so long as you don’t overdo it with the water and make sure the stone is allowed to completely dry out before wearing or storing it.
For example, you can use a soft cloth that is damp to clean your bloodstone instead of soaking it in water.
Another common tip with stones that are prone to damage from water is to lightly mist them like you do your plants.
Mist the stones directly, or just mist the air around them so the water falls on them.
Then, gently wipe them with a soft cloth.
It would take years for rust to form from this water method, and you aren’t going to create cracks in the stone from light misting.
Using filtered water is another consideration if you are going to put your bloodstone in water or cleanse it with water.
Elements and minerals in tap water could encourage the discoloration.
More About Bloodstone
Bloodstone is a mineral that is also known as heliotrope.
It is a member of the quartz family, but also contains jasper.
It has a hardness level that is near 7 out of 10 on the Mohs scale.
Bloodstone is a green stone that is a kind of chalcedony and quartz, and it contains speckles and inclusions of red that are iron.
It has been a highly sought out stone for thousands of years, and has been considered the March birthstone since 1912. It is also called heliotrope.
The stone is rich in legend and history, and has sometimes been called a stone of Babylon.
Although it does have some metaphysical uses, its significance in Christianity is far from the metaphysical world.
It has been used for divination and some legends used it because they thought it made them appear invisible.
In ancient India, other uses included actual physical healing.
There, the stone was held over wounds after it was dipped in cold water in order to stop bleeding.
The theory behind this was that the iron oxide in the stone served as a tool to stop bleeding.
The blood of Christ has also been connected to this stone.
Many cultures and dogmas have found a relationship with blood to this gem, which is how it has earned its name.
Properties of Bloodstone
Bloodstone is called an aggregate heliotrope because it is a mixture of a number of different minerals.
It is a cryptocrystalline mixture of quartz that also contains some jasper, and on occasion, some chalcedony.
The most common kind of bloodstone is an opaque green stone that is jasper with red speckles that are called inclusions.
The red speckles to some look like blood spots, and come from the iron inclusions.
It is iron that also gives blood its red color, so the shade of these speckles is genuine to the shade of blood where the stone gets its name from.
The red speckles are iron oxide, and may contain some hematite.
Bloodstone forms in shallow waters, and at lower temperatures.
It forms through precipitation and develops in groundwater that is rich in silica.
It will begin to form through the fissures and cracks in rocks and is mined from there.
It is called a heliotrope because it reflects light in a unique way.
Its structure is conchoidal in its crystalline formation, and it holds a 6.5 to 7 on the Mohs hardness scale which makes it a relatively hard stone.
This hardness means that the stone’s integrity itself can withstand water, but its iron oxide content suggests that water is not recommended or you could rust the stone.
The pretty red spots could turn rusty on you.
These red spots are against a backdrop that appears like a deep green, which makes bloodstone a beautiful rock to own.
It is typically mined in India, however it is found all over the world.
Major sources of bloodstone can be found in the United States in Washington, Oregon, Nevada, and California.
It can also be found in Madagascar, China, Australia, and Brazil.
Invest in Bloodstone
If you are wondering “can you put bloodstone in water” the answer is yes, so long as it is done with an understanding of the risks.
It just might not be as pretty as the day you got it years down the road if you do this regularly.
Invest in bloodstone today and its beauty and sparkle will keep you and any room it is in feeling enchanted.
You might also like: